Use Heat Pumps in Temple Hills for Efficient Heating and Cooling
In moderate climates heat pumps are a very efficient way to heat and cool a home. The pump just moves hot air from the ground or atmosphere into a house or business. Heat Pumps Temple Hills use just a small amount of energy, because they are moving the heat and not creating it. This makes it a greener form of energy than a furnace or boiler. The reverse is true as well. A heat pump can pull hot air out of a house. This means that this one device can heat or cool a home. In fact a heat pump can move hot air just about anywhere. If a person has a heated swimming pool, it is probably a heat pump that keeps the water warm. Homeowners can have a backup heating system. When the thermostat reaches a certain temperature, it will turn off the heat pump and turn on the furnace.
Just because the heat pump is a smaller piece of equipment doesn’t mean that the homeowner doesn’t have to maintain it. The air filter should be changed at least once a month. A clogged air filter reduces the amount of air that the pump has available to move. The same can be said for coils and fans. If any vegetation has grown up outside the heat pump it should be removed. Nothing should be stored beside the heat pump that will restrict the air flow into or out of the unit. Keeping the unit clean and unobstructed will improve it’s performance from 10% to 25%.
Once a year a professional Heat Pumps Temple Hills technician should inspect and clean the system. He has a special instrument that will verify that the system has an adequate air flow. All of the seals on the ducts will be inspected to make sure that they don’t leak. The motor will be oiled to ensure that the parts run smoothly and don’t wear each other out. Belts should be inspected and replaced if they are starting to show signs of wear. It’s also important that he check and make sure that the thermostat is working properly.